Unsolved
This post is more than 5 years old
1 Message
0
12826
May 25th, 2015 09:00
Wyse T50 - Toolbar in Citrix connection
Wyse T50 - Toolbar in Citrix connection
Hi all,
I have seen a couple of posts about this issue but they all refer to RDP session instead of Citrix. This is the problem where the Wyse Toolbar pops up and wont disappear and is causing probelms as you can imagine but I am unable to find a solution when it comes to Citrix connections.
The custom RDP connection with -f seems to work but does anyone know how to create a Custom ICA connection with this switch?
Any thoughts would be greatly appreciated
Thanks,
Rich
No Events found!
ITDept-2015
7 Posts
0
May 25th, 2015 09:00
Hello,
For an ICA connection there is this option in the feb 2012 firmware on the wyse.com site
DisablePanelInFullscreen={yes, no}
Yes/no option to disable the panel on the local system when the ICA connection is launched in fullscreen.
This values of this parameter will be applied if the connection is set to Fullscreen=yes.
If this parameter is not used in the connection definition, the panel will remain active in auto-hide mode (that is the user can display the panel by moving the mouse pointer over the hidded panel; for example, the top of the screen).
For a browser connection to the web login you can use the following in conjunction with kiosk mode
DisablePanelInKioskMode={yes, no}
Yes/no option to disable the panel automatically in cases where the browser is launched in Kiosk mode.
Regards