Unsolved
This post is more than 5 years old
1 Message
0
3677
May 25th, 2015 09:00
R50LE and Dual Monitor resolution mismatch
R50LE and Dual Monitor resolution mismatch
I have been using the R50LE with 6 months with VMWare view on dual monitors. I had Planar 19" monitors and that worked fine. I recently upgraded to dual Dell 23 inch monitors. These run native 1920 x 1080 resolution. The R50LE detects both monitors as Dell 23 and the first monitor gives me an option for 1920 x 1080. The problem is that the second monitor only gives me an option for 1280 x 1024 which looks terrible. I have tried everything i can think of but no matter what i do i can't get the second monitor to give me an option for the correct resolution. Any ideas on what the problem is?
No Events found!
pwalsh1019
2 Posts
0
May 25th, 2015 09:00
I have the same issue with the Dell Monitors on my R10 and V10's ....the R10's i can fix by running two DVI cables from the monitors to the devices but i cant do that with the V10's ..... any help out there to fix this ? We are running wtos 7.1_122