Unsolved
This post is more than 5 years old
13 Posts
0
5046
May 25th, 2015 06:00
R50 Connection to Projector
R50 Connection to Projector
We have an R50 in one of our training rooms that is connected to a split VGA, going to the LCD as well as to a projector. If the projector goes off, the LCD goes into a sleep/idle state and won't re-awaken until the projector is back on. Anyone aware of an INI setting where I can say to the monitor always stay on?
No Events found!
epa80
13 Posts
0
May 25th, 2015 06:00
Just to update this some more: the VGA cable of the LCD goes into a splitter, one that goes to a wall part connecting it to the VGA port of the projector; the other cable off the split goes to a DVI adapter, that plugs into the DVI port of the R50. We had a V10L hooked up in an IDENTICAL manner that did not display this behavior.