Unsolved
This post is more than 5 years old
5 Posts
0
56558
May 22nd, 2015 05:00
problem entering boot menu t50
problem entering boot menu t50
Hi all,
i want to push new firmware on wyse t50. have downloaded firmware and usb flash utility from download section. have prepared usb flash with usb flash utility. problem is that i can't enter boot menu with P and Power button. same with DEL and Power button combination. Device always load OS.
what is that I’m doing wrong?
THX
No Events found!
sasapop
5 Posts
0
June 10th, 2015 10:00
Hi all,
problem was, I was not using Wyse keyboard.
woundedoutlaw
1 Message
0
June 10th, 2015 10:00
Sorry to revive an old thread but I followed these instructions and I get it to recognize me hitting the p key but the activity light steadily blinks green and nothing ever appears on screen.
Please note I am not using a wyse keyboard on this t50. I found it at a yard sale and need to reset it....
SweetSVT99
1 Message
0
June 10th, 2015 10:00
I have noticed on some of them you have to:
-Hold the power button down (WITHOUT holding down P) until the gray background with yellow font "WYSE splash screen" comes up
-Let go of the power button, and press P once.
-Steve
Nayy
8 Posts
0
June 10th, 2015 10:00
After update, boot time password is Fireport (respect lower and uppercases)
Nayy
8 Posts
0
June 10th, 2015 10:00
Hi romulis and sasapop, to enter boot menu and succeed at every time, i maintain the Power Button + CTRL + P Touch at boot time.
It works great every time.
Rmontalvo1
623 Posts
0
June 10th, 2015 10:00
woudedoutlaw,
since you found it in a yard sale, it may be bad and need repair.
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
WallScreens
4 Posts
0
June 10th, 2015 10:00
Bouncing on the 'P' key as Romulis suggested worked for us. Microsoft USB wired keyboard.