Unsolved
This post is more than 5 years old
1 Message
0
1602
June 19th, 2017 09:00
ERROR IN WTOS EVENT LOG. NOT RECOGNIZING WIRELESS BARCODE SCANNER.
Trying to hook up a wireless Taotronics barcode scanner(TT-BS012) to a Wyse T10 on firmware 8.0_505. When plugging in the wireless dongle these errors occur:
USB: query config failed -4
USB: device probe on port 2 failed
Not sure why this one is not working. We have the same model wireless scanner but a little older and it is working in the same thin client environment (tc models, ini file, etc). Perhaps Taotronics is using a different firmware now? Anyway, can someone send me a list of handheld wireless barcode scanners that are known to work with Wyse T10 thin clients?
Thanks,
Mike
No Events found!
RMontalvo
2 Intern
•
560 Posts
0
June 27th, 2017 10:00
ThinOS is a very secure, closed OS with limited hardware support. This allows the thin client's kernel to be small and have an almost instant-on experience. You will need to review the Release Notes for the firmware installed for a list of supported devices. Unfortunately, 8.0_505 is too old and I don't have access to the release notes.