Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

B

BigRockr

2 Posts

693

May 26th, 2015 03:00

C50LE won't take local network settings?

Question C50LE won't take local network settings?

Trying to set up a new C50LE via the local Network Manager Dialog. I am trying to assign the usual stuff, static IPaddr, gateway, etc...trivial stuff. I NEVER get the "Apply" button to sensitize so I can apply the setting and move on. This is an evaluation so I am not really interested in setting up a server nor will I in the future as I only require a few devices.

Is there some other setting somewhere else that needs to be disabled/enable to allow an "Apply"?

Thanks

BigRockr

2 Posts

May 26th, 2015 03:00

Angry Here's one fix. Appears that there is not that much knowledgeabletraffic or any Wyse.

Could not get Network Dialog to accept any static config as root. Basically I just went in and remounted the read-only partition as rw. I could THEN get an "Apply" on the network dialog upon entry of my static IP info. Then I remounted as read-only. Kinda defeats the purpose of have a GUI to abstract the user from the internals, but I'm not the product manager. New to where things are in this Linux but they aren't too weird. Wasted a lot of time though.

Was this post helpful?

View All

No Events found!

Top