Unsolved
This post is more than 5 years old
1 Message
0
865
July 7th, 2017 08:00
VGA Input
Have a Wyse 5040 and would like to use it as a VGA monitor, however, when attaching a VGA signal to the input there is no display. What is needed to enable the input port as i am not seeing any setup options?
No Events found!
RMontalvo
2 Intern
•
560 Posts
0
July 12th, 2017 09:00
You need to use the On-screen Buttons on the bottom of the monitor and select the input.