Unsolved
This post is more than 5 years old
7 Posts
0
52393
November 11th, 2015 12:00
WDM Workgroup ThinOS
I'm pretty sure I already have the answer to my question but I need it confirmed. Is it possible to configure ThinOS devices from WDM Workgroup edition? I can make new configuration files and I can deploy the package but it always fails. From what I've read it's almost as if I would need to use Default Device Configuration, which isn't available in the workgroup edition.
Thanks.
RMontalvo
2 Intern
•
560 Posts
0
November 12th, 2015 12:00
That is correct. To do what you want to do requires WDM Enterprise, however, you can manage your WTOS-based thin clients using an FTP, HTTP or HTTPS server. For more details, see the WTOS Admin Guide available at www.wyse.com/kb
twlucas
7 Posts
0
November 13th, 2015 10:00
Thank you, that's what I was afraid of.
welder314
5 Posts
0
March 6th, 2017 10:00
That is incorrect, you can certainly manage WTOS devices from WDM workgroup edition. I can easily set up group profiles and do things like pre-configure RDP connections and associated settings, manage monitor settings, and do firmware updates. The documentation is horrible, but once you figure it out, it can be done.