Unsolved
1 Rookie
•
7 Posts
0
51
October 2nd, 2024 14:30
vxverify reports vmk_tag error
I'm running an old version of vxRail manager with internal vCenter. I recently ran vxveriy to verify I'm ready to go from 4.7.540 - 4.7.560. The only failure was on all 4 hosts: vmk_tag: vSAN or vMotion shouldn't be run on vmk2 (paraphrasing).
Thing is, the vSAN serivice has been running on vmk2 since the systems inception and 2 subsequent upgrades.
My question is this: is it safe to ignore this failure message.? I do not have active support contract with Dell. Otherwise, I'd open a case with them.
TIA
No Events found!
DELL-Sam L
Moderator
•
7.5K Posts
0
October 3rd, 2024 10:10
Hello mcbot,
Here is a link to a kb that maybe of assistance.
https://dell.to/4dAXZmC
mcbot
1 Rookie
•
7 Posts
0
October 7th, 2024 15:42
@DELL-Sam L
I did run the "esxcli network ip interface tag get" on 2 of 4 hosts and only one tag was there, vSAN. While something to consider, I don't think this article speaks directly to my case. I thank you for the suggestion.
DELL-Sam L
Moderator
•
7.5K Posts
0
October 8th, 2024 13:41
Hello mcbot,
It is best to move VSAN and VMotion to another VMK other than 2 as with newer releases there are connection issue that we have seen and can create issues.