Unsolved
This post is more than 5 years old
1 Rookie
•
34 Posts
0
4177
April 10th, 2017 01:00
VXRAIL replication
for replication between two vxrails, do both appliances must be under same vCenter or different?
Also How much bandwidth required for replication between both appliances?
No Events found!
JTG450
12 Posts
0
April 11th, 2017 03:00
We have this logged with DellEMC at present around the supported config of the kernals and how it would be affected during an automated upgrade.
With regards to the bandwidth that all depends on data change/size or replication etc etc could go from 10 meg to 40 gig connections, latency though is always the biggest factor with I think 12ms being the greatest for a stretched cluster now.
JTG450
12 Posts
0
April 11th, 2017 06:00
On this with regards to the vCentre if you need independent recovery (and albeit easier) run a second vCenter. Also regarding creating additional VMkernal ports:
“As long as the customer does not touch the original deployed vmk adapters mgmt., vsan and vmotion adding additional VMk or port groups even with TCP/IP stack are not affected as generally they are ignored by our workflows…”
Alp Arslan
1 Rookie
•
34 Posts
0
April 11th, 2017 07:00
So it means replication is possible if both VxRail are under same vCenter or different.
Alp Arslan
1 Rookie
•
34 Posts
0
April 11th, 2017 07:00
What is the average bandwidth like for 2 Data domain average bandwidth is 6 Mb. and for replication between 2 VNX systems, bandwidth is 2 Mb.
JTG450
12 Posts
1
April 12th, 2017 03:00
It all depends on your backend network config really. So P2P, MPLS etc etc. But have a look at Duncan Eppings site yellowbricks.com and also https://pbradz.wordpress.com/tag/vxrail/
Many Thanks
Jonathan Garrett
Enterprise Architect
for Osborne Clarke LLP
osborneclarke.com
…………………………………………………..……....................................
E jon.garrett@osborneclarke.com
T: 44 117 917 3632 44%20117%20917%203632>
M + 44 7801 466 588