Unsolved
This post is more than 5 years old
1 Rookie
•
10 Posts
0
2936
December 14th, 2018 00:00
[Vxrail old gen vspex blue] Can't reach the BMC : No ping, No web console
Hello,
I have one node in my Vxrail ( old gen vspex blue) that I can't ping the BMC and I cant reach the web console.
I installed the IPMItool in the esxi I do the reset cold and warm also I can change the IPs from the BIOS and the IPMI but always no ping.
Best regards,
Rached Ben Cheikh
No Events found!
DELL-Naoyuki K
4 Operator
•
1.9K Posts
0
December 15th, 2018 08:00
Next Action is to reimage node using USB as if node replacement has been done.
If still problematic after that, you should go for actual node replacement.
rachedbc
1 Rookie
•
10 Posts
0
December 16th, 2018 23:00
Thank you for your response. Can you provide me the doc for the node reimage using the USB, I have only the golden image .
DELL-Naoyuki K
4 Operator
•
1.9K Posts
0
December 17th, 2018 21:00
if you have enough privilege you can view solve procedure for Node Replacement of Quanta Node that includes node reimage steps and you can also download required software and image from support.emc.com.
If you don't, please engage dell emc support personell via requesting SR