Unsolved
1 Rookie
•
19 Posts
0
654
October 7th, 2022 05:00
VxRail 4.7 Secure Connect Gateway
How do I configure a VxRail 4.7 to connect with a new, external Secure Connect Gateway?
Since SCG is taking over, this would be useful information to have available.
Thanks!
No Events found!
DELL-Sam L
Moderator
•
7.5K Posts
0
October 7th, 2022 11:00
Hello ja88888888,
Your current vxrail version is not supported to use with SCG. You will need to be at version 7.0 or higher. Here is the link to the support matrix for SCG. https://dell.to/3RIGDJx
DELL-Josh Cr
Moderator
•
9.2K Posts
0
October 10th, 2022 07:00
https://dell.to/3yulz2Z under connectivity has the procedure for installation.
ja88888888
1 Rookie
•
19 Posts
0
October 10th, 2022 07:00
https://support.emc.com/docu97738
That link is showing me the support matrix for vxrail v7, I am using v4.7, so this link above is shows for the 4.7 vxrail release a support matrix for SRS and SCG on page 63, and a 'Y' for SCG and 4.7. Looks like SCG is supported for VxRail 4.7 or am I reading that wrong? Thanks for investigating!