Unsolved
This post is more than 5 years old
2 Posts
0
25663
February 8th, 2011 14:00
vWorkspace TCP/IP Ports used
Hi all,
I would like to know if there is any document or similar where I can find all the TCP/IP ports used in a vWorkspace environment (in v. 7.2 if possible).
Mainly, I need to know the tcp or udp ports used in the communications between the vWorkspace server and the virtual desktops where the users connect to.
Thanks in advance,
Rubén
No Events found!
DELL-Jon Ro
1 Rookie
•
64 Posts
0
February 13th, 2011 23:00
The ports are listed in the administrator's guide, starting at page 11.
Data Collector Service — It listens for Connection Broker service connections on 5203.
This is a Windows service that runs inside each managed computer or vWorkspace enabled Remote Desktop Session Host, and communicates back and forth with the Connection Broker. When PNTools is installed onto a desktop, a Windows Firewall port exception rule is automatically added to allow incoming connections on this port.
Connection Broker — It listens for Data Collector service connections on 5201. It also listens for incoming client connection requests on a
configurable port, using 8080 as the default. Optionally, the Connection Broker can be configured to require SSL encryption using 443 as the default.
Registry Service — This service listens for registry messages on port 5205 on Remote Desktop Session Host and broker computers.(not virtual desktops)
Michel Roth
173 Posts
0
February 16th, 2011 11:00
There's also an old post here that has some information as well: http://communities.quest.com/community/vworkspace/blog/2008/05/13/tcpip-ports-used-in-the-virtual-access-suite/