Unsolved
This post is more than 5 years old
1 Message
0
163840
July 1st, 2015 04:00
Question on Slow USB stick response on D10D/VDI
Dear all,
We are using D10D as WYSE and connecting to our HQ at remote country.
The network latency is only 25 ms.
But when I using Kingstone DTVP stick, the launcher takes 40 sec to 90 sec to load.
On the desktop PC, it's only 5 ~ 10 secs.
Is there anything we can change on WYSE setting to improve this ?
thanks
No Events found!
gregpolen
92 Posts
0
July 2nd, 2015 09:00
Frank,
I'm trying to get vWorkspace to use the USB of the D10D, but the Virtual USB Hub on the VM says the software is not installed. I can get the USB drive to work as a network drive with \\tsclient, but the D10D can only read FAT32 formatted USB drives.
How did you configure the D10D so that the Virtual USB Hub works?
Thanks,
-Greg