Unsolved
This post is more than 5 years old
180 Posts
0
4355
January 6th, 2011 22:00
pntsc.exe and Manual PIT Creation = EOP Xtream FAIL
I hope this is just me doing something wrong!
vWorkspace backend: 7.1(MR1)
Connector/client: 7.1mr1 and 7.2 - both on Windows 7 x64
I can successfully generate .pit files using pntsc.exe and connect to published applications/desktops but not if I enable EOP Xtream.
I get the "Connecting to XXXXX" dialog box come up and then a "Remote Desktop Can't connect to the remote computer for one of these reasons.....' window pop up. On occasion closing these locks up the whole vWorkspace client forcing me to restart the local system.
Any ideas?
I can replicated this on 2 different workstations (1 in a domain and 1 non-managed device)
Connecting via AppPortal or WebPortal works fine with EOP Xtream!
Cheers,
Dan
DELL-Andrew W1
378 Posts
0
January 7th, 2011 07:00
Not the most helpful answer in the world - but it works fine here in my lab
Do you want to raise a Support case and I'll webex with you?
Thanks, Andrew.
dbolton
180 Posts
0
January 7th, 2011 18:00
Yeah go on then....
I'll do raise it on Monday (if I remember)
Cheers,
Dan.
DELL-Andrew W1
378 Posts
0
January 10th, 2011 06:00
Cool, I've grabbed the case - speak to you later