This post is more than 5 years old
8 Posts
0
144614
December 3rd, 2014 12:00
EOP Print Server
I have installed the EOP Print Server Role on a Windows 2012 R2 Print Server. When I try to add EOP printers in the vWorkspace management console, I get to the point where you add the EOP Printer and the Select Network Printer box pops up with just Microsoft Windows Network. I tried to expand the Micorsoft Windows Network but nothing happens. I have tried disabling the firewall just to make sure nothing was getting blocked. I have also installed printers on this server and they do not show up either. Any idea why I cannot see any of my network printers?
No Events found!
DELL-Andrew W1
378 Posts
0
December 12th, 2014 08:00
Hello!
What you need to do is enable and start the Computer Browser service on the machine running the vWorkspace Management Console.
This is normally enough - within a few minutes it should have found your print server.
If not, enable and start the Computer Browser service on your Print Server too and install the vWorkspace Management Console on here too - Run the Console on here and this will definitely find the printers.
Thanks, Andrew.