Unsolved
2 Posts
0
60
January 2nd, 2024 08:15
vplex fix "Logic Unit" and "Storage Volumes" error status
The link status is normal, but the storage array prompts for degradation.
I need to restore the downgraded status.
The reason is that after multiple new luns(100 lun) were created in Unity400, these luns were deleted in Unity 400, but the vplex kept prompting for downgrade.
When creating a new Lun, it was only created on one of them, but not on the other.
device topology
Vplex Local 6.2
FC SAN
Unity400A Unity400B
No Events found!
DELL-Josh Cr
Moderator
•
9.2K Posts
0
January 2nd, 2024 14:26
Hi,
Thanks for your question.
Did you remove the luns from vplex after you deleted them? The steps in this thread should work. https://dell.to/3NMJ9Q7
Let us know if you have any additional questions.
phineese
2 Posts
0
January 17th, 2024 07:33
@DELL-Josh Cr
Thanks Josh,
After unity was deleted, it was not deleted in vplex because the device was in use, so I wanted to find the best way.
At the same time, there is also the repair of logical units. Does it only need to be rescanned to automatically repair the logical units that have been deleted in unity but still exist in vplex?
Maybe clicking "forget unreachable luns" can solve it?
DELL-Josh Cr
Moderator
•
9.2K Posts
0
January 17th, 2024 13:43
Yeah that could do it, try that.