Unsolved
This post is more than 5 years old
2 Posts
0
3532
September 19th, 2017 02:00
Windows server 2016 - FC/MPIO VNX5300
Hello,
We try to install new Hyper-v cluster with windows server 2016 (4 nodes)
Is there any specific guide how to properly configure Windows server MPIO with VNX?
Do I have to install Navisphere agent?
How should I add the host in EMC Unisphere? manually?
Thanks for help
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
September 19th, 2017 06:00
I would suggest to start with the host configuration guide available from elabnavigator.emc.com - might also be on support.emc.com
dariuszn
2 Posts
0
September 19th, 2017 06:00
Hello, thank you. I already started with https://elabnavigator.emc.com/vault/pdf/windows.pdf but there are only possible methods. There is no information that PowerPath is required
I'm wondering how what is supported. Propably Powerpath offer a littile bit better perfmorance but I did not find any article comparing with new MPIO in Windows Server 2016
anthome
1 Rookie
•
20 Posts
0
April 16th, 2018 00:00
Did you get anyway with this? my experience is that if you just use MPIO you will get alerts in VNX regarding the initiators.. and to use powerpath.. one has to use license..