Unsolved
1 Rookie
•
9 Posts
0
42
March 11th, 2025 22:15
VNXe3200 NFSv4
Hi,
How can I enable NFS v4 on my old VNXe3200?
I tried uemcli /net/nas/server -id nas_14 set -enableNFSv4 yes but got Operation failed. Error code: 0x6000002
You are not authorized to perform the requested operation. Access is denied. (Error Code:0x6000002).
Thanks!
P.S.
service@(none) spa:~> uemcli /net/nas/server show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection
Remote certificate:
Issuer: CN=emc-vnxe3200
Subject: CN=emc-vnxe3200
Valid from: 2023-03-21 08:50:00 Z
Valid to: 2026-03-20 08:50:00 Z
Serial: --
Id: --
1: ID = nas_14
Name = NAS
NetBIOS name =
SP = spa
Storage pool = pool_10
Interface = if_41
NFS enabled = yes
NFSv4 enabled = no
CIFS enabled = no
Multiprotocol sharing enabled = no
Unix directory service = none
Health state = OK (5)
No Events found!
DELL-Sam L
Moderator
•
7.5K Posts
0
March 12th, 2025 10:02
Hello UAnton,
Have you updated or made any changes to your administrator password? Have you ensure that you are using valid admin credentials and that the user account has the necessary permissions to execute the command? Additionally, verify that the Unisphere CLI is correctly installed and that you are connected to the appropriate storage system. What is your current OE version on your VNXe3200?
UAnton
1 Rookie
•
9 Posts
0
March 12th, 2025 13:56
@DELL-Sam L Hi,
CLI doesn't work on VNXe 3200
Error returned from the target: 10.100.1.201
CLI commands are not supported by the target storage system.
my ver. 3.1.15.10216415
(edited)
DELL-Sam L
Moderator
•
7.5K Posts
0
March 12th, 2025 17:13
Hello UAnton,
Which version of CLI are you using?
UAnton
1 Rookie
•
9 Posts
0
March 12th, 2025 17:21
@DELL-Sam L I was trying NaviCLI and vis SSH because can't download UNisphere CLI.
UAnton
1 Rookie
•
9 Posts
0
March 12th, 2025 17:38
Thank you @DELL-Sam L
NFSv4 enabled = yes