Unsolved
This post is more than 5 years old
3 Posts
0
504
June 29th, 2017 00:00
VNXe3200 DC to DR Access error
Hi,
VNXe 3200 configure DC - DR Replication Mode with block level. When we access DC to DR Storage it's shown in browser not safe and when we proceed with not safe and click then again show Forbidden error . . . . . Anyone have solution to resolve it
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
June 30th, 2017 02:00
not sure what you mean
prashlko
3 Posts
0
June 30th, 2017 02:00
Hi Rainer,
We have two VNXe 3200 Boxes with different location and we configure as block level on both storage.Both storage connect through MPLS Network. We are going to configure to replication on both storage so that we access form one site to another site storage it's ping but through unisphere it's not opening .......showing browser error ( not safe ) and when we click proceed unsafe then show error ( Forbidden error).
Rainer_EMC
4 Operator
•
8.6K Posts
0
June 30th, 2017 07:00
Please check the VNXe3200 security configuration guide and make sure that all ports necessary are not blocked between these systems.
If that doesnt work I would suggest to open a service request.
prashlko
3 Posts
0
June 30th, 2017 22:00
Please mail me the Port list so that i can check again
Rainer_EMC
4 Operator
•
8.6K Posts
0
July 3rd, 2017 09:00
please go to do support.emc.com
select support by product
input VNXe3200
select Documentation
select Manual and Guides
download the VNXe security configuration guide
looks like though you probably have a different problem
its always a good idea to search for your exact error in the knowledgebase on support.emc.com
see kb 470544
fix DNS or try using systemname.domain