Unsolved
This post is more than 5 years old
1 Rookie
•
2 Posts
0
7298
April 18th, 2017 01:00
VNXe cli cmds
|
|
I'm using the below command to view the LUN configuration in VNXe1600. /stor/prov/luns/lun show -detail. And i'm trying the same command in VNXe3200 but, nothing is display. /metrics/metric show . This command is used to list all performance command supported by VNXe. Is there any Unisphere commands to list all configuration command supported by VNXe. |
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
April 18th, 2017 05:00
yes - for each product there is a CLI command reference PDF manual - which you can download from support.emc.com
uemcli also has a help switch to show all commands
larry_t
5 Posts
0
April 19th, 2017 15:00
Hi seliyavapr,
I did find a reference:
docu31491_VNXe-Unisphere-CLI-User-Guide.pdf
Please search on that and you will find reference in Community with URL link.
I think the message which has the link was 834268. Good hunting.
LT
larry_t
5 Posts
0
April 19th, 2017 15:00
Sorry, I don't have a VNXe specific source, but some great VNX related CLI commands.
It's a little dated but the "thesanguy.com" has some great examples:
Useful Celerra / VNX File Commands
https://thesanguy.com/2011/06/03/useful-celerra-commands/
Undocumented Celerra / VNX File commands
https://thesanguy.com/201/01/11/undocumented-celerra-commands/
Clariion / VNX Block Specific (see the many reports, scripts)
https://thesanguy.com/category/clariion-vnx-block-specific/
"Quick" list of Celerra Health Check with CLI commands
https://thesanguy.com/2011/06/08/celerra-health-check-with-cli-commands
On the crazy attention to detail side... "Default Passwords"
https://thesanguy.com/2015/12/02/default-passwords/
VNXe https://support/emc.com/docu31492_VNXe-Series-Quick-Start.pdf (see step 4)
Good luck...