Unsolved
1 Rookie
•
6 Posts
0
19
September 22nd, 2025 17:41
VNX5200 Unified SNMP Trap Test Question
Hi,
I logged into the Unisphere VNX Client and went to System > Monitoring and Alerts > Notifications for File menu.
Then, I changed the currently configured trap IP.
After reconnecting the CS MGMT cable, I SSHed into the CS serial port and performed an SNMP trap test.
Why does the following occur?
Please, help me.
No Events found!
DELL-Sam L
Moderator
•
7.7K Posts
0
September 23rd, 2025 16:42
Hello SDH1,
Which OE version are you running? Did you reboot the SP?
SDH1
1 Rookie
•
6 Posts
0
September 23rd, 2025 23:49
@DELL-샘 L
Hello,
The Block software version is 05.33.009.5.184, and the File software version is 8.1.9-184.
A month ago, I rebooted the NAS using the "/nas/sbin/nas_halt now" command.
DELL-Sam L
Moderator
•
7.7K Posts
0
September 25th, 2025 14:32
Hello SDH1,
When you rebooted the SP did you get any error messages?
SDH1
1 Rookie
•
6 Posts
0
September 26th, 2025 00:16
@DELL-Sam L
No, no error message occurred.
Why did it occur during the trap test?
However, the SNMP server generated the "test SNMP traps" message normally.
DELL-Sam L
Moderator
•
7.7K Posts
0
September 26th, 2025 17:01
Hello SDH1,
It is hard to say why you received the error without looking at the logs.