Unsolved
78 Posts
0
723
June 22nd, 2021 06:00
VNX2 How to print Cisco Avago SFP stats through .server_config
Hello,
I want to print TX RX statistics of optical port on VNX2 that has Cisco Avago 1G SFP through .server_config command on control station. What do i use instead of bcmXG since i am not using broadcom SFP
.server_config server_3 -v "bcmXG fxg-1-0 stats"
10Gig. Ether fxg-1-0 -> LINK is UP, NIC is STARTED, Mtu 1500, Speed 10000 Mbps, Duplex FULL.
TxPktSnt TxPcktQu [LsoPkts] RxPkts RxDlvrd [LroPkts]
0x0000000000 0x0000000000 [0x0000000000] 0x009c3c1568 0x0000000000 [0x0000000000]
TxFreeBDCnt TxBDProd TxBDCons TxPktProd TxPktCons
0x1fe0 0x0000 0x0000 0x0000 0x0000
RxFreeBDCnt RxBDProd RxBDCons RxCompProd RxCompCons
0x0000 0xfe60 0x0e60 0x138c 0x037b
---------------------Tx Dropped--------------------------
RingFull NIC Stpd Not Data ExcessiveFrags*
0x00000000 0x00000000 0x00000000 0x00000000
-------------------Rx Dropped--------------------
NoProto NoMsgbProt NoMsgbData
0x9c3c1572 0x00000000 0x00000000
--------------------Misc Tx--------------------------------
Split 0x0000000000 transmit packets for EVM
--------------------Misc Rx--------------------------------
SpuriousRxInt RxFrameErr L3CksmErr L4CksmErr
0x00000000 0x00000000 0x00000000 0x00000000
1624368749: ADMIN: 6: Command succeeded: bcmXG fxg-1-0 stats
DELL-Sam L
Moderator
•
7.6K Posts
0
June 22nd, 2021 16:00
Hello yogad,
Which VNX2 do you have and what is the current OE that is running?
yogad
78 Posts
0
June 22nd, 2021 17:00
Hello,
Its a VNX 5800 running on 8.1.21-266
DELL-Sam L
Moderator
•
7.6K Posts
0
June 23rd, 2021 08:00
Hello yogad,
I am not seeing any command to be able to check for cisco Like you can a Broadcom.
yogad
78 Posts
0
June 23rd, 2021 10:00
Yeah i couldn't find any documentation on it either. Are there other ways that you are aware of from with in VNX to pull TX RX and error information
DELL-Sam L
Moderator
•
7.6K Posts
0
June 23rd, 2021 13:00
Hello yogad,
I am not aware of any other way to pull the info.