Unsolved
This post is more than 5 years old
1 Message
0
994
May 28th, 2018 23:00
VNX Traps(alert) Properties
Hi Folks,
I would like to know the list of Traps attributes available for VNX System, as we have to map the VNX traps attribute to existing system attributes
Any leads/help is appreciated!
Thanks in Advance
No Events found!
kelleg
4.5K Posts
0
May 29th, 2018 09:00
The MIB for VNX Block is already installed on both storage processors.
To enable it/set up SNMP responses, be sure the Single Notification for Multiple Events check box is not selected in the Action for events field on the General response tab.
In the systems drop-down list on the menu bar, select a storage system.
2. Select System > Monitoring and Alerts > Notifications for Block > Notification Templates.
3. Right-click the template for which you want to set up SNMP responses and select Properties.
4. Click SNMP.
5. In SNMP Management Host, type the IP address of the third-party enterprise-management application that you want to receive SNMP traps.
6. Click Test to test this response.
7. Click OK to close the Template dialog box
The VNX MIB, by default, does not contain every trap. This is because EMC allows you to customize the notification method for each event that occurs.
https://support.emc.com/kb/463389 Where can I find the Management Information Base (MIB) file for my CLARiiON or VNX storage system?
https://support.emc.com/media48612_How_to_use_SNMP_on_VNX.mp4?language=en_US
https://support.emc.com/docu41454_Configuring_Events_and_Notifications_on_VNX_for_File.pdf?language=en_US
https://support.emc.com/docu41522_Using-SNMPv3-on-VNX.pdf?language=en_US
glen