VNX OE Upgrade error

Anyone see an issue when the wizard starts the upgrade and fails on the "Setup Maintenance Mode"? 

        '/nas/sbin/nas_connecthome -m -email_priority Disabled -ftp_priority Disabled -modem_priority Disabled -https_priority Disabled -esrs_priority Disabled' failed with return value (1) : Error: -esrs_priority : invalid Command usage: nas_connecthome -info | -test { -email_1 | -email_2 | -ftp_1 | -ftp_2 | -modem_1 | -modem_2 | -https } | -modify [ -modem_priority {Disabled | 1 | 2 | 3} ] [ -modem_number  ] [ -modem_number_2  ] [ -ftp_priority {Disabled | 1 | 2 | 3} ] [ -ftp_server {  | } ] [ -ftp_port  ] [ -ftp_ipprotocol { IPv4 | IPv6 } ] [ -ftp_user  ] [ -ftp_passwd [passwd] ] [ -ftp_folder  ] [ -ftp_mode {active | passive} ] [ -ftp_server_2 {  | } ] [ -ftp_port_2  ] [ -ftp_ipprotocol_2 { IPv4 | IPv6 } ] [ -ftp_user_2  ] [ -ftp_passwd_2 [passwd] ] [ -ftp_folder_2  ] [ -ftp_mode_2 {active | passive} ] [ -email_priority {Disabled | 1 | 2 | 3} ] [ -email_from  ] [ -email_to {[,]} ] [ -email_subject  ] [ -email_server {  | } ] [ -email_ipprotocol { IPv4 | IPv6 } ] [ -email_server_2 {  | } ] [ -email_ipprotocol_2 { IPv4 | IPv6 } ] [ -https_priority {Disabled | 1 | 2 | 3} ] [ -https_url { url } [ -https_ipprotocol { IPv4 | IPv6 } ] [ -https_ca_file { ca_certificate_file_name } ] [ -https_verify_server { yes | no } ] [ -dial_in_number  ] [ -serial_number  ] [ -site_id  ] [ -encryption_enabled { yes | no } ] [ -dial_in_enabled { yes | no } ] [ -service_info ] | -help    

'' failed with return value () :

IM_14505279609