VNX DAE compatibility

Question

I'm curious if there is any difference whatsoever between the "N" and "R" lines of VNX disk array enclosures. They come in 15 or 25 slot, and some made specially for the VNXe series which end in E, but I can't find any documentation suggesting they're otherwise any different. Can anyone shed some light on this?

Example part numbers:

V31-DAE-N-15 vs V31-DAE-R-15

V31-DAE-N-25 vs V31-DAE-R-25

V2-DAE-N-25-A vs V2-DAE-R-25-A

V31-DAE-N-15E vs V31-DAE-R-15E

V31-DAE-N-25E vs V31-DAE-R-25E

You get the idea...

Thanks!

Rainer_EMC · Accepted Answer

-R should be the order number when the DAE is ordered with an EMC rack and -N for customer rack install

difference is most likely which rails and power cords get shipped

There are the sales order numbers - if you want to determine if there is a difference you need to look at the engineering part numbers like 005050149

then look it up in the Disk and OE matrix available from support.emc.com

kelleg · Answer

Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.

glen

Mtexter · Answer

I was getting around to it I hate loose ends as much as you!

VNX

VNX DAE compatibility

Was this post helpful?