After resetting the management port, you can see the IP address, the VNX launcher is also installed, but I cannot access it through the browser. Do you have any idea what the problem might be? (Advanced IP Schanner already sees it)
Yes, this software was installed using the installation guide, but unfortunately it is still not available. don't I have to press the button again to reach it ?
DELL-Josh Cr
Moderator
•
9.3K Posts
0
May 30th, 2023 06:00
Hi,
Thanks for your question. These are the default IP addresses.
SP-A: 128.221.1.250 (Service LAN port on SP-A SAN Management Module)
SP-B: 128.221.1.251 (Service LAN port on SP-B SAN Management Module)
Let us know if there is anything else that we can help you with.
DELL-Josh Cr
Moderator
•
9.3K Posts
0
May 31st, 2023 13:00
https://dell.to/3IPiz6u do the procedure for install, and the service lan procedure and management software here. https://dell.to/3IONwYk
Nipeko
1 Rookie
•
5 Posts
0
May 31st, 2023 13:00
ohh i see, if I have a serial port and an RJ 12 connection, how will my device use the storage space. Does it not require special software?
Nipeko
1 Rookie
•
5 Posts
0
September 19th, 2023 20:45
@DELL-Josh Cr
Thank you :)
Hi,
After resetting the management port, you can see the IP address, the VNX launcher is also installed, but I cannot access it through the browser. Do you have any idea what the problem might be? (Advanced IP Schanner already sees it)
Nipeko
1 Rookie
•
5 Posts
0
September 20th, 2023 07:25
@DELL-Josh Cr,
Yes, this software was installed using the installation guide, but unfortunately it is still not available. don't I have to press the button again to reach it ?
(edited)