Unsolved
This post is more than 5 years old
9 Posts
0
1762
June 20th, 2019 06:00
Upgrade from Block OE 05.31.000.5.502 & File OE 7.0.35-3 to latest versions
Hello everyone, sorry for my English, please.
I have a VNX 5300 with Block 05.31.000.5.502 and File OE 7.0.35-3. This version is very very old.
I need to upgrade storage to the latest version of OE's.
As I know the latest version for VNX5300 block OE is 05.32.000.5.249 and for the file is 7.1.83.2
Where we can check for what minimum versions of OE's must be installed on VNX to be able to upgrade to latest versions?
Thank's
No Events found!
Rainer_EMC
4 Operator
•
8.6K Posts
0
June 22nd, 2019 06:00
should be mentioned in the release notes
if not - please open a service request
mnach
1 Message
0
September 9th, 2019 05:00
Hello,
KB 382638 - VNX Operating Environment (OE) Revision Matrix provides you the target version (File and Block) for VNX1 and VNX2.
https://support.emc.com/kb/382638
KR
aymen.khelifi
4 Posts
0
September 10th, 2019 06:00
Hi,
it should be mentioned in the release note, if you do not have data on the array i suggest re-imaging the hole array using the ltest version.