This post is more than 5 years old
54 Posts
1
3078
June 22nd, 2016 13:00
Report does not select ay data in VNX Monitoring and reporting
HI
am trying to configure vnx monitoring ad reporting in my environment as per the the installation documents i have completed successfully,
While am trying to cofigure an array,i cant able to view the report
ERROR : Report does not select any data
No Events found!
SteveK821
2 Intern
•
149 Posts
0
June 24th, 2016 00:00
OK, and does the connectivity test work OK when discovering the array? What security level was used when you installed NaviSecCLI (if you are not using the M&R vApp). Run this command on the M&R server to check:
naviseccli security -certificate -getLevel
If it does not say "low", you need to uninstall/reinstall NaviSecCLI and set the security level to low in the installation wizard.
Source: https://support.emc.com/kb/477891
SteveK821
2 Intern
•
149 Posts
0
June 23rd, 2016 07:00
Have you enabled Statistics Logging on the VNX Array?
https://support.emc.com/kb/330697
Suriya_007
54 Posts
0
June 23rd, 2016 09:00
We have already enable Statistics logging on the VNX Array But still we can't able to view the report
ERROR : Report does not select any data
Suriya_007
54 Posts
0
June 24th, 2016 16:00
Thanks a lot for the valuable answer
after changing to low its working....
While am trying to add VNXe array am getting the below error
Unknown error encountered on host 'XXXXXX'; received error was « SSLPeerUnverifiedException: peer not authenticated »
Kindly help me on this