Unsolved
This post is more than 5 years old
1 Rookie
•
1 Message
0
1070
January 10th, 2018 02:00
POWER ERRORS ON THE EMC VNX 5200
Community Members,
I have an issue on MY VNX5200 Unified System I am getting an error with the power supply
Below is the error description
| The power supply is faulted. This may be caused by overheating or another hardware issue. If the power supply module only is faulted, the power supply module may need to be replaced. Note: Power Supply A may have a physical label of A0. Power supply B may have a physical label of A1. Power supply C may have a physical label of B0. Power supply D may have a physical label of B1. |
I have done the physical inspection and cannot see any faulty power supply, Please assist in sharing ideas on what I should do.
No Events found!
kelleg
4.5K Posts
0
January 10th, 2018 08:00
I'd recommend opening a case with support - this my be a reporting issue or a real issue - they'll need the spcollects from both SPA and SPB in order to determine what the issue is.
glen