Unsolved
This post is more than 5 years old
2 Posts
0
1723
October 25th, 2017 02:00
i can't monitor VNXe3200 with PRTG
Hello ,
anyone can help me to support Dell EMC Vnxe3200 ,i use network monitor PRTG for monitor this storage
but i can't monitor this device because PRTG need to MIB id or Template for monitor can you tell me ,what i can find MIB or Template this where ?
thanks and sorry for my language
No Events found!
VCE_JQ
1 Message
0
October 25th, 2017 08:00
I suggest you check 2 KBs there
www.paessler.com
and challenge their friendly Support.
Regards,
JQ
Rainer_EMC
4 Operator
•
8.6K Posts
0
October 25th, 2017 09:00
VNXe3200 only supports sending SNMP traps - the MIB for that should be on the support site.
It doesnt support a snmpd for SNMP polling via get requests
You could ask the management software vendor to get the info via REST API or SMI-S
I would suggest to try out Unisphere Central - which is a free EMC tool to monitor VNXe/Unity system
jj9991
2 Posts
0
October 26th, 2017 19:00
So that mean i can't use PRTG for monitor right ?
because i want to monitor all device for this Soulution
Rainer_EMC
4 Operator
•
8.6K Posts
0
October 27th, 2017 02:00
depend on which methods PRTG uses to get its data
if it can also execute other commands or APIs to get the data you could get in done
you wont get the stats from the VNXe3200 via SNMP
I would really suggest to contact PRTG support - they should know best about their product
fsbt
1 Rookie
•
4 Posts
0
December 13th, 2017 06:00
Hello,
See this : https://kb.paessler.com/en/topic/26423-emc-storage-array
But the difficuly is to download naviseccli
support.emc.com il not available !