Unsolved
This post is more than 5 years old
2 Intern
•
214 Posts
0
729
August 2nd, 2018 06:00
Change mirrorview ports on gen 2 VNX
Hi there,
Does anyone have any documentation on if Mirrorview ports can be changed on a gen 2 VNX? I've seen posts on here that state that they can't and other that state that they can be if an EMC engineer is involved.
Thanks
Ed
No Events found!
edhoward
2 Intern
•
214 Posts
0
August 2nd, 2018 08:00
Just so I have this completely right in my head, it wouldn't be possible to move mirrorview to some newly installed 10GbE ports unless we completely flatten both arrays?
Rainer_EMC
4 Operator
•
8.6K Posts
0
August 2nd, 2018 08:00
you cannot change it unless you want to re-init your system an change your io card config