Unsolved
1 Rookie
•
11 Posts
0
495
February 9th, 2022 09:00
Cannot set the management IP using the IPMItool
Hi,
I am able to access my VNe3200 using the IPMItool on .252 for SPA. The problem I am having is when I use the svc_initial_config script to set the hostname and management IP address it does not set.
I run the correct command and then do a svc_diag. I see that nothing is set.
Thank you,
Carl
No Events found!
cabman2323
1 Rookie
•
11 Posts
0
February 10th, 2022 11:00
After putting the service port into rescue mode and running svc_reinit. I was able to reset the management IP and gain access to the EMC storage via the web. Had to use svc_ssh -e
This has been solved.
Thanks,
Carl