Unsolved
This post is more than 5 years old
6 Posts
0
886
March 1st, 2018 17:00
Cannot expand host disk after LUN expansion
I think this has to do with the fact that we use to have Recover Point in our environment. RecoverPoint was removed from the environment but the Consistency Groups were never destroyed and it appears that any LUN that was in a CG can no longer be expanded. The LUN / disk is still taking on reads and writes however it seems the disk is still owned by RecoverPoint. Has anyone had this issue? I don't think I can get RP installed and configured again so there has to be another way of doing this. I thought about removing the Splitter from the array but I can't figure out how. USM has no options for software removal that I can find. Any help would be GREATLY appreciated
Thanks in advance
kelleg
4.5K Posts
0
March 2nd, 2018 09:00
Pretty sure you need to remove the LUNs from the CG before you can expand them. You might want to contact support to see if they can help you.
glen
Darrell818_aee638
6 Posts
0
March 2nd, 2018 09:00
If I go into Engineering Mode in USM, I see the option to remove the Splitter Software. What I dont know is if this causes a reboot to the SPs. Has anyone done this process before?
thanks