Unsolved
1 Rookie
•
6 Posts
0
800
December 18th, 2020 20:00
Cannot connect on emc STPE15 VNX5300 please help urgent
Hi,
Im having a difficult to connect to emc STPE15 VNX 5300, first i was able to connect thru management port using 128.221.1.251 SPB but after the reboot i cannot connect anymore. There is an amber light flashing at the back of both SPA and SPB.
No Events found!
DELL-Josh Cr
Moderator
•
9.3K Posts
0
December 22nd, 2020 10:00
Hi itv-glenn,
Is this a new install or was it an existing install? Can you log into Unisphere?
itv-glenn
1 Rookie
•
6 Posts
0
December 25th, 2020 09:00
@Josh
Hi josh, its an existing installation and I can't connect on both management IP and unisphere. Is there anyway to reset the unit to default settings so I can access the management IP or unisphere?
DELL-Josh Cr
Moderator
•
9.3K Posts
0
December 28th, 2020 05:00
Try reseating each SP and see if you are able to access it then.