SRM5 & Inyo - Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response

Hello All,

I'm having some issues setting up my SRM5 Lab, here is my config:

- VNX5300 (flare 05.32.000.5.006) - production site

- VNX5700 (flare 05.32.000.5.006) - DRsite

enablers:

- VNXSnapshots

- UnisphereBlock

- Snapview

- Mirrorview/S

VMware

- esx 5i 496512 * 2

- VCVA *

- SQL databases....

- SRM5

SRA's:

- EMC VNX Replicator for VNX SRA 5.0.12

- EMC Mirrorview Enabler for VNX 5.0.22

- EMC VNX SRA for VMware vCenter SRM 5 5.0.1

- Navisphere cli 7.31.33.0.41

- VSI 5.0.0

- Solutions Enabler 7.2.1 (I know this is not needed, however it is installed as part of VSI?)

Setup:

- Mirrorview working (Ok?)

- Array Pairs Enabled (both sites)

- Protection Group setup OK.

here is my issue = Recovery plan test fails:

4. Create Writeable Storage Snapshot	Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response.	2012-08-31 12:08:17 (UTC 0)	2012-08-31 12:08:37 (UTC 0)
4.1. Protection Group SRM_Protected_VMs	Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response.	2012-08-31 12:08:17 (UTC 0)	2012-08-31 12:08:37 (UTC 0)
5. Power On Priority 1 VMs	Inactive
6. Power On Priority 2 VMs	Inactive
7. Power On Priority 3 VMs	Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response. Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response. Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response.	2012-08-31 12:08:37 (UTC 0)	2012-08-31 12:08:37 (UTC 0)
7.1. 2008-2	Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response.	2012-08-31 12:08:37 (UTC 0)	2012-08-31 12:08:37 (UTC 0)
7.1.1. Configure Storage	Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response.	2012-08-31 12:08:37 (UTC 0)	2012-08-31 12:08:37 (UTC 0)
7.1.2. Configure Test Network	Inactive
7.1.3. Power On	Inactive
7.1.4. Wait for VMware Tools	Inactive
7.2. 2008-1	Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response.	2012-08-31 12:08:37 (UTC 0)	2012-08-31 12:08:37 (UTC 0)
7.2.1. Configure Storage	Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response.	2012-08-31 12:08:37 (UTC 0)	2012-08-31 12:08:37 (UTC 0)
7.2.2. Configure Test Network	Inactive
7.2.3. Power On	Inactive
7.2.4. Wait for VMware Tools	Inactive
7.3. 2008-3	Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response.	2012-08-31 12:08:37 (UTC 0)	2012-08-31 12:08:37 (UTC 0)
7.3.1. Configure Storage	Error - Failed to create snapshots of replica devices. SRA command 'testFailoverStart' didn't return a response.	2012-08-31 12:08:37 (UTC 0)	2012-08-31 12:08:37 (UTC 0)

any suggestions on what this might be? I’m not 100% sure if this is relate to Snapview or not?

Logs attached

Thanks!