Unsolved
This post is more than 5 years old
2 Intern
•
470 Posts
0
1541
July 4th, 2011 17:00
raid group on same bus/enclosure
is it better to create the raid group on different bus/enclosure or same bus/enclosure? do I get better performance using disks spread out on different bus/enclosure?
No Events found!
RafaelNovo
92 Posts
0
July 4th, 2011 20:00
Not a very VMware related question. Better move to another forum.
But long answer short, you will not have any performance benefit that worth the trouble
rupak1
29 Posts
0
July 5th, 2011 06:00
This belongs to the ClARiiON forums.
In any case, please check the CLARiiON Best Practises for Performance and Availability - Release 30 document. http://powerlink.emc.com/km/live1/en_US/Offering_Technical/White_Paper/h5773-clariion-best-practices-performance-availability-wp.pdf?mtcs=ZXZlbnRUeXBlPUttQ2xpY2tTZWFyY2hSZXN1bHRzRXZlbnQsZG9jdW1lbnRJZD0wOTAxNDA2NjgwNTkxMzljLGRhdGFTb3VyY2U9RENUTV9lbl9VU18w
Check for sections and Binding across DAEs (page # 54) and Binding across back-end buses.