Start a Conversation

Unsolved

This post is more than 5 years old

1583

September 7th, 2011 20:00

initialization of the InputAccel Server failed at step 90

I am getting following message while connecting to IAServer.

Please advise me what should I do to resolve the error.

Kindly refer to the attachment on the error screen.

1 Attachment

94 Posts

September 12th, 2011 08:00

Not sure this applies.  Give it a try and if you continue to have a problem give Documentum Support a call.

Nick

esg87174

Cause

Multi returns "Error 4501 bad parameter" when I run my batch with Multi version 5.1.5.1162. However the same batch works correctly when using Multi 4.x. Why?

Resolution

Error -4501 may occur if the trigger value used by Multi is at higher level than the trigger level of Multi. For example, you are triggering Multi at Level 1, but the only trigger value you use for this instance is a Level 7 Ready. To avoid this error, make sure the ready trigger variable is set at the same level as the trigger level or at a lower level..  

No Events found!

Top