Unsolved
This post is more than 5 years old
33 Posts
0
1272
March 19th, 2012 14:00
How does SRM work with clusters using RDM's?
Does anyone have any good documentation on how SRM works with Clusters. I have a customer that has Microsoft and Linux clusters using Raw Disk Mapped LUNs and I want to make sure I set up the protection groups and recovery plans correctly. The RDM's are being replicated with MirrorView.
No Events found!
reseach
2 Intern
•
225 Posts
0
March 19th, 2012 23:00
You might take this artical as reference, https://community.emc.com/docs/DOC-15795, which is talking about use of Microsoft Exchange 2007 on EMC CLARiiON as an application protected by VMware Site Recovery Manager and EMC MirrorView. Factors considered include initial configuration planning, remote recovery, and failback.
if you have more information about your landscape, we will see what else we can do.
cqde_89d27a
33 Posts
0
March 20th, 2012 08:00
The document you refered to says that RDM's are not supported (p5), but then it was written in 2009.
I am looking for something that explains how RDM's are now supported and describes how it works.
Specifically how SRM works with the replication technology to present the RDM's to the DR side during test or actual failover.