Unsolved
This post is more than 5 years old
1 Rookie
•
37 Posts
0
4054
December 22nd, 2011 01:00
Configuring VASA with EMC arrays – CLARiiON, VNX and VMAX
I had a few questions recently on how to setup VASA with EMC Arrays and as a result I went off to find out exactly how it is done.
The blog posting below details the steps I went through, hope it's of some help.
Regards
Craig Stewart
vSpecialist Technical UK/I
No Events found!
Craig_Stewart
1 Rookie
•
37 Posts
0
January 4th, 2012 06:00
Glad to hear it helped you out
MallocArray
1 Message
0
January 4th, 2012 06:00
Thanks. Using this guide I was able to get my system setup for VASA.
Craig_Stewart
1 Rookie
•
37 Posts
0
September 10th, 2014 08:00
Hi
This should still be valid for the current generation of VNX's, I'm not aware of any major changes that would affect how it is setup.
Will drop you an email, so if you still run into issues you can ping me an email on it.
Cheers
Craig