Unsolved
This post is more than 5 years old
1 Rookie
•
3 Posts
0
3631
April 17th, 2018 02:00
VMAX SNMP trap - Trap Variables
Hi,
We are trying to understand trap forwarding from VMAX for any alerts/events in the VMAX array. As far as as I understand, we can configure SNMP through Unisphere.
- Is there any other configuration that can be done to receive VMAX traps?
- Besides, where can I get the MIB files for VMAX
- Are there any documents around understanding the Trap Variables for the same.
No Events found!
finbarrcorksac
99 Posts
1
April 17th, 2018 06:00
Hi,
in respect or recieving traps SNMP is the recommended way of configuring them. There is a really useful doc that goes into more detail on configuration and the trap variables
https://support.emc.com/docu78909_VMAX-Management-Software-8.3-Events-and-Alerts-Guide.pdf?language=en_US
and the mib's can be found here they are marked 7.x but can be used on 8.x
https://support.emc.com/kb/331269
Regards
Fin.
SKT2
2 Intern
•
1.3K Posts
0
May 10th, 2018 07:00
install SE on any of the server available (preferably with direct storage/FC connection) and setup storevntd . You just need to tune the daemon_options file pointing to the SNMP trap destination that you have in your environment. personally I used EMC SRM back end server as the trap destination. You can use what is available in your environment.