Unsolved
This post is more than 5 years old
3 Posts
0
722
March 4th, 2017 19:00
VMAX Clone
Dear All,
We have a source and a clone target VMAX3 from which we are planning to make target as a source for SAN Copy.
Do I need to terminate the source and clone target pair and then make a SAN Copy source, the Host having the clone source at VMAX is shutdown.
Let me know please
Regards,
MKP
No Events found!
KW160
121 Posts
0
March 5th, 2017 08:00
You can either terminate the session or leave the clone in an "activated" state. As long as the clone is Read/Write to the VNX/CX pulling in the data with SAN Copy it should work.