Unsolved
This post is more than 5 years old
6 Posts
0
1180
November 17th, 2017 06:00
SRDF invalid group Alert
Hi all, Its possible to configure an Unisphere alert for SRDF Groups that are in an invalid state?. Because i figure it out only monitoring the symapi.log file... Its a manual and bored task.
Any ideas?
Thanks so much!
No Events found!
gruizmanas
6 Posts
0
November 17th, 2017 07:00
Hi Finbarr, i had enabled that settings (SRDF Link status) but didnt works when a group became invalid. It works perfectly for splitted links...but never send an email when the SRDF group is invalid.
Could be the verbosity setting?. Because i had configured the alerts only for Fatal, Error and Warning.
Thanks again.
finbarrcorksac
99 Posts
0
November 17th, 2017 07:00
Hi Gonzalo,
if you go to the following location in Unisphere you will be presented with a list of alerts including SRDF that you can alert on which includes SRDF link status so enabling this should allow you to track if SRDF groups go invalid.
Any questions let me know.
Regards
Finbarr.