Unsolved
This post is more than 5 years old
64 Posts
1
4720
July 12th, 2017 09:00
How to determine which one is emgmt-0 vs emgmt-1
I am seeing problems on VMAX3 All Flash where I am seeing alert "Retention failed to run for Symmetrix XXXX within the last 24 hours" This error is repeated every hour. It appears this error has crept up since upgraded VMAX to the target code last month. I open a support ticket and was told to log into vapp manager on mgmt-1 and reboot it. However, I don't know which ip mgmt-1 or mgmt-0. I tried to get help via support chat and there were not able to answer the question. I have logged into vapp(port 5480) but I couldn't determine anything. Any idea where this information is kept? I am concerned about rebooting the wrong one.
No Events found!
johncampbell1
52 Posts
0
November 9th, 2017 03:00
Hi Wallace ,USAK*
We've been seing these on our older hybrid VMAX40k since 25th October...i'm sure not precipitated by any code upgrade, we don't have any onboard management on our older 40ks ..(although we do have newer 450AFs but not getting simmilar messages).
5876.288.195
We control our 40ks via symapi hosts...hence not familiar with any vapp manager on MGMT-0 or 1, in fact do these refer to vMAx3 only onboard mgmt tools). We chose not to set these up on our new 450AFs.
So doesn't look like workaround appropriate.
Are these messages benign ? Aggregation/Retention failed to run on xxxx within last 24 hours.
Interested to hear of USAK's experience since August ... John
tonywa
1 Message
0
December 5th, 2017 12:00
check this one: https://emcservice.force.com/CustomersPartners/kA2j0000000RHxgCAG similar error caused by a WIndows 2008 bug.