Unsolved
1 Rookie
•
5 Posts
0
1057
May 4th, 2021 12:00
ESXi 6.5 host not able to see VMAX storage
I provisioned a couple of luns from VMAX 40k to an ESXi host, and after rescanning, the host does not see the VMAX storage. The log produced these errors after rescanning. Any thoughts? Note, the host boots from SAN, but the bootlun is from a PureStorage array.
2021-05-04T18:56:27.317Z cpu14:79510 opID=1295a0c0)WARNING: VMW_SATP_INV: satp_inv_determineStatus:199: Unknown Check condition 0/2 0x5 0x24 0x0.
2021-05-04T18:56:27.317Z cpu14:79510 opID=1295a0c0)WARNING: VMW_SATP_INV: satp_inv_determineStatus:199: Unknown Check condition 0/2 0x5 0x24 0x0.
2021-05-04T18:56:27.317Z cpu14:79510 opID=1295a0c0)WARNING: vmw_psp_rr: psp_rrSelectPathToActivate:1101: Could not select path for device "Unregistered Device".
2021-05-04T18:56:27.317Z cpu14:79510 opID=1295a0c0)WARNING: NMP: nmpPathClaimEnd:1217: Device, seen through path vmhba1:C0:T11:L2 is not registered (no active paths)
2021-05-04T18:56:27.317Z cpu14:79510 opID=1295a0c0)WARNING: VMW_SATP_INV: satp_inv_determineStatus:199: Unknown Check condition 0/2 0x5 0x24 0x0.
2021-05-04T18:56:27.317Z cpu14:79510 opID=1295a0c0)WARNING: VMW_SATP_INV: satp_inv_determineStatus:199: Unknown Check condition 0/2 0x5 0x24 0x0.
2021-05-04T18:56:27.318Z cpu14:79510 opID=1295a0c0)WARNING: vmw_psp_rr: psp_rrSelectPathToActivate:1101: Could not select path for device "Unregistered Device".
2021-05-04T18:56:27.318Z cpu14:79510 opID=1295a0c0)WARNING: NMP: nmpPathClaimEnd:1217: Device, seen through path vmhba1:C0:T11:L1 is not registered (no active paths)
2021-05-04T18:56:27.387Z cpu19:65897)WARNING: VMW_SATP_INV: satp_inv_determineStatus:199: Unknown Check condition 0/2 0x5 0x24 0x0.
2021-05-04T18:56:27.388Z cpu19:65897)WARNING: VMW_SATP_INV: satp_inv_determineStatus:199: Unknown Check condition 0/2 0x5 0x24 0x0.
2021-05-04T18:56:27.388Z cpu19:65897)WARNING: vmw_psp_rr: psp_rrSelectPathToActivate:1101: Could not select path for device "Unregistered Device".
2021-05-04T18:56:27.388Z cpu19:65897)WARNING: VMW_SATP_INV: satp_inv_determineStatus:199: Unknown Check condition 0/2 0x5 0x24 0x0.
2021-05-04T18:56:27.388Z cpu19:65897)WARNING: VMW_SATP_INV: satp_inv_determineStatus:199: Unknown Check condition 0/2 0x5 0x24 0x0.
2021-05-04T18:56:27.388Z cpu19:65897)WARNING: vmw_psp_rr: psp_rrSelectPathToActivate:1101: Could not select path for device "Unregistered Device".
DELL-Sam L
Moderator
•
7.6K Posts
0
May 5th, 2021 08:00
Hello sflood01,
Here is a link to a KB that maybe of assistance.
https://www.dell.com/support/kbdoc/en-us/000039814/vmax-devices-on-esx-are-discovered-with-failed-dead-paths?lang=en