Unsolved
This post is more than 5 years old
44 Posts
0
2960
June 25th, 2018 06:00
Anyone apply BIOS v2.80 to R730 yet? Issues
Hi. Has anyone applied R730 v2.80 BIOS yet? The first node in a v6.5U1 cluster will not vMotion off any VMs that are powered on that node. Cluster is in EVC. Was told by VMware, this is some outlier that EVC nor a cpuid mask in /etc/vmware/config can not solve for. So that means you really have upgrade all nodes pretty close in time. I am curious if anyone else has the same experience. Thanks,,,
No Events found!
RachelGomez
2 Intern
•
162 Posts
0
September 22nd, 2022 23:00
To access the BIOS system setup, press the F2 key while the system is powering on.
From the Main menu screen, select System BIOS.
Load the default settings by selecting Default.
Configure your system BIOS settings by using the following values:
Press the Esc key to return to the System BIOS screen.
Save changes when prompted.
Greeting,
Rachel Gomez