VNX 5400 Zoning with Hyper-V 2012 R2

you zone Hyper-V just like you zone any other hosts, one HBA to Fabric A, second HBA to Fabric B. Assuming you are not booting from SAN, all hosts will end up in one storage group and all LUNs will be shared between the 4 hosts. Make sure multipathing is configured correcty (either PowerPath or native MPIO) 

https://support.emc.com/docu5134_Host-Connectivity-Guide-for-Windows.pdf?language=en_US

Dear Dynamox ,

Thanks for your reply and documents link ,

Let say 4 Hyper-V running on HP c7000 enclosure.

Total 4 uplinks so two uplink active and two standby(for link redundant)

two uplink connected to one SAN Switch and another 2 uplink connected to another SAN switch.

each servers having two WWWN Numbers ,

so in that scenario how Host will get storage from EMC VNX 5300 , kindly let me know the steps by steps not by Iscsi.

Thanks