This post is more than 5 years old
20 Posts
0
1006
February 26th, 2017 14:00
Link Array and LUN ID to Host File System Report - Vipr SRM v4.0.1
I found a report in the library I would like to use as a foundation. I need the Array, and LUN ID associated with the physical drive also included in the table. I can not seem to find the correct expansion to add those elements.
I like this report because it shows the true used capacity for the devices. We are still abut 50% Thick provisioned so some of the other reports under Hosts like SAN Disk will not show me the true USED capacity for the LUN.
Any ideas would be appreciated.
This is the location of the report in SRM.
Report Library >> Physical Hosts >> Inventory >> File Systems
Thank you
LS
No Events found!
Flo_csI
2 Intern
•
167 Posts
0
February 27th, 2017 01:00
Hi LCS,
Does the report in that post do what you want : https://community.emc.com/message/926468 ?
If not let me know what you would need differently.
Rgds.
PS: for Physical Host the data parttype='FileSystem' has the partsn property which contains the LUN WWN on which the FS is mounted.
LCS2
20 Posts
0
February 27th, 2017 03:00
This might be the ticket! Let me go through to be sure it is a fit. Thank you!