This post is more than 5 years old
1 Rookie
•
68 Posts
0
842
February 22nd, 2017 09:00
How granular can the VMAX Performance report get ?
I understand that by default the data collection is 30 minutes for VMAX Solution packs, but in the case of performance data how granular can I configure it ?
Can I configure the solution pack to collect data every 5 minutes, will that cause any command time out or collection errors ?
No Events found!
fredde1
120 Posts
0
February 22nd, 2017 14:00
hey Littlefinger
It looks like the lowest option in the gui is 15:
5 minutes will most likely not give enough time for cycles to complete
Thanks
Tim
nerdnair
1 Rookie
•
68 Posts
0
February 27th, 2017 19:00
Thank you Tim.
I was more curious to know if ViPR SRM can be used for a detailed performance analysis like the Graphs we get on Unisphere for VMAX which has data points every 5 minutes.
fredde1
120 Posts
1
February 28th, 2017 08:00
Even though it's 15 minutes it means that performance data by UNIVMAX is collected every 5 minutes. It’s just transferred to SRM every polling cylce to avoid overload on UNIVMAX. So i would keep that at 15
Thanks
Tim
nerdnair
1 Rookie
•
68 Posts
0
February 28th, 2017 10:00
Thanks again Tim, that answers my question.