Unsolved
This post is more than 5 years old
2 Intern
•
718 Posts
3
7899
December 21st, 2015 08:00
Ask the Expert: Best Practice for fixing ViPR SRM Topology Maps and Queries on it
Welcome to this Ask the Expert discussion.
|
|
Ask the Expert: Best Practice for ViPR SRM Solution Pack installation and configuration |
During this event we'll go over the best ways to fix and resolve, as well as steps to discover the topology maps in SRM monitoring and reporting. Let's discuss how topology works in SRM and address some basic topology queries. Will address issues in Topology data collection and how it works. Our support subject matter experts are available during the period of this event to provide you detailed information and support on any of your queries.
Meet Your Experts:
Technical Support Engineer III Krishna is a member of the EMC India ASD (Advanced Software Division), working with SRM support team from past three year, have experience in ECC, ProSphere and UIM products. Previously worked with ClARiiON support. |
|
Associate Principal Engineer After completing his MS in Cloud Computing Gnan started working at EMC and has been for the past 5 years. During his tenure, he has helped develope a few websites for his team to help PS and SRM teams deal with upgrade project and customer follow-up's. |
This discussion takes place from Dec. 28th - Jan. 15th. Get ready by bookmarking this page or signing up for e-mail notifications.
Share this event on Twitter or LinkedIn:
>> Ask the Expert: Topology Maps in ViPR SRM Best Practice for fixing ViPR SRM Topology Maps and Queries on it http://bit.ly/1OGhQnI #EMCATE <<
slarkin1
1 Message
0
December 28th, 2015 06:00
What issues are there with the topology maps? What steps do we need to go through to fix them and how can we query them repeatedly and have consistent results?
Thank you
nerdnair
1 Rookie
•
68 Posts
0
January 6th, 2016 11:00
How does topology maps work for IBM VIO Servers / Client LPARS. In my case it only displays the Host and does not display the end to end storage connectivity.
What steps can I follow to troubleshoot this issue in detail. Any help will be much appreciated.
Thanks
Vaishak
dnorton1
74 Posts
0
January 7th, 2016 07:00
Did you discover the servers both via the Physical Host SP and the IBM LPAR SP? You need both to collect all the required information.
Dan
nerdnair
1 Rookie
•
68 Posts
0
January 7th, 2016 08:00
Yes the hosts are discoverable via the Physical Host SP and IBM LPAR SP, however I noticed that the Disk Information is not being populated in the reports, the fields return a blank value.
nerdnair
1 Rookie
•
68 Posts
0
January 8th, 2016 09:00
Hello Gnan,
I have uploaded the Collector Diagnostics and also the logs for IBM LPAR and Generic RSC to the FTP Link.
Thanks a lot for your assistance in this regard.
Vaishak
RobertoAraujo1
2 Intern
•
718 Posts
0
January 21st, 2016 04:00
This Ask the Expert event has officially ended, but don't let that retract you from asking more questions. At this point our SME are still welcomed to answer and continue the discussion though not required. Here is where we ask our community members to chime in and assist other users if they're able to provide information.
Many thanks to our SMEs who selflessly made themselves available to answer questions. We also appreciate our users for taking part of the discussion and ask so many interesting questions.
ATE events are made for your benefit as members of ECN. If you’re interested in pitching a topic or Subject Matter Experts we would be interested in hearing it. To learn more on what it takes to start an event please visit our Ask the Expert Program Space on ECN.
TomRogneby
8 Posts
0
February 8th, 2016 11:00
Thanks for leaving this open for questions.
I am trying to get topology working on a Linux host. When I run "inq -snia_test", I get the following error:
!!! SNIA INITIALIZATION FAILED - THIS CONFIGURATION MAY BE UNSUPPORTED !!!
This is running on an RHEL 6.7 system. I have verified that libHBAAPI.so.2 is in /usr/lib64.
Am I missing a configuration step? This seems to be the only thing I'm missing to get topology working for my hosts.
Thanks.